TL534 Quality and Process Control in Spinning

6 ECTS - 3-0 Duration (T+A)- . Semester- 3 National Credit

Information

Code TL534
Name Quality and Process Control in Spinning
Term 2024-2025 Academic Year
Semester . Semester
Duration (T+A) 3-0 (T-A) (17 Week)
ECTS 6 ECTS
National Credit 3 National Credit
Teaching Language Türkçe
Level Yüksek Lisans Dersi
Type Normal
Mode of study Yüz Yüze Öğretim
Catalog Information Coordinator Prof. Dr. OSMAN BABAARSLAN


Course Goal / Objective

The basic input in the field of textile engineering is to be able to transfer the requirements of process and quality control procedures required for yarn production to the students at the higher education level.

Course Content

I-INTRODUCTION AND DEFINITIONS, II-PROCESS AND QUALITY CONTROL, III-YARN PRODUCTION PROCESSES AND PROCESS STEPS, IV-RAW MATERIAL AS A FACTOR EFFECTING QUALITY , V-PROCESS CONTROL IN PRODUCTION MACHINES , VI-PROCESS FEATURES, VII-WORKING CONDITIONS, VIII - QUALITY CONTROL IN YARNS PRODUCED BY DIFFERENT PROCESSES

Course Precondition

No prerequisites

Resources

1. O. Babaarslan, Process and Quality Control in Spinning, ÇÜ., Faculty of Engineering, Textile Eng. Division, 2022.

Notes

1. Trommer G., Rotor Spinning, Deutscher Fachverlog GmbH, Germany (1995) 2. Klein W., A Practical Guide to Ring Spinning, The Textile Institute, UK, (1987) 3. Lawrence C., Fundamentals of Spun Yarn Technology, CRC Press LLC, USA (2003) 4. Klein W., The Technology of Short Staple Spinning, The Textile Institute, UK (1990) 5. Lord Peter R.,Handbook of Yarn Prduction; Technology, Sciences and Economics, Woodhead Publishing Ltd., UK (2003)


Course Learning Outcomes

Order Course Learning Outcomes
LO01 In the area of yarn technology (spinning, weaving, knitting) increases knowledge in process and quality control at the level of higher education
LO02 Understands the fundamentals of process and quality control in spinning
LO03 Analyze the interaction between raw materials and machinery in textile engineering and its effects on quality and productivity
LO04 Evaluates process conditions and production parameters in yarn production process
LO05 Develops solution proposals for factors affecting the process efficiency and quality


Relation with Program Learning Outcome

Order Type Program Learning Outcomes Level
PLO01 Bilgi - Kuramsal, Olgusal Developing and intensifying knowledge in the textile engineering area, based upon the competency in the undergraduate level 5
PLO02 Bilgi - Kuramsal, Olgusal Grasping the inter-disciplinary interaction related to textile engineering
PLO03 Bilgi - Kuramsal, Olgusal The ability to use the expert-level theoretical and practical knowledge acquired in textile engineering area 4
PLO04 Bilgi - Kuramsal, Olgusal Interpreting and forming new types of knowledge by combining the knowledge from the textile engineering area and the knowledge from various other disciplines 3
PLO05 Bilgi - Kuramsal, Olgusal Solving the problems faced in textile engineering area by making use of the research methods
PLO06 Yetkinlikler - Bağımsız Çalışabilme ve Sorumluluk Alabilme Yetkinliği Systematically transferring the current developments in textile engineering area and one’s own work to other groups in and out of the area; in written, oral and visual forms 3
PLO07 Yetkinlikler - Öğrenme Yetkinliği Using the knowledge and the skills for problem solving and/or application (which are processed within textile engineering) in inter-disciplinary studies
PLO08 Yetkinlikler - Öğrenme Yetkinliği The ability to present one’s own work within the international environments in textile engineering area, orally, visually and in written forms 3
PLO09 Bilgi - Kuramsal, Olgusal Developing and intensifying the current and high-level knowledge in the textile engineering area with the use of original thinking and/or research processes and in a specialistic level, based upon the competency in the undergraduate level 4
PLO10 Bilgi - Kuramsal, Olgusal The ability to evaluate and use new information in textile engineering with a systematical approach 4
PLO11 Bilgi - Kuramsal, Olgusal To be able to study in a programmatic manner, in accordance with the logical integrity required by the thesis subject and within the scope of the thesis determined by the supervisor.
PLO12 Bilgi - Kuramsal, Olgusal Contributing to the progress in textile engineering area by independently carrying out a study which uses a new idea, method, design and/or application which brings about innovation in the area; or, applying a conventional idea, method, design and/or application to a different environment
PLO13 Bilgi - Kuramsal, Olgusal Publishing at least one scientific article in the area of textile engineering in a national and international peer reviewed journal
PLO14 Yetkinlikler - Öğrenme Yetkinliği Contributing to the solution of textile engineering area-related social, scientific, cultural and ethical problems and promoting the development of these values


Week Plan

Week Topic Preparation Methods
1 I-INTRODUCTION AND DEFINITIONS Lecture Öğretim Yöntemleri:
Anlatım
2 II-PROCESS AND QUALITY CONTROL Lecture, Question and Answer Öğretim Yöntemleri:
Anlatım, Soru-Cevap
3 III-YARN PRODUCTION PROCESSES AND PROCESS STEPS Lecture, Discussion Öğretim Yöntemleri:
Anlatım, Tartışma
4 IV-RAW MATERIAL AS A FACTOR EFFECTING QUALITY Lecture, Discussion Öğretim Yöntemleri:
Anlatım
5 PROCESS CONTROL IN PRODUCTION MACHINES Lecture, Question-Answer, Discussion Öğretim Yöntemleri:
Anlatım, Soru-Cevap, Tartışma
6 V.1. Production Machines Lecture, Question-Answer, Discussion Öğretim Yöntemleri:
Anlatım, Soru-Cevap, Tartışma
7 V.2. Raw Material-Machine Interaction Lecture, Question-Answer, Discussion Öğretim Yöntemleri:
Anlatım, Soru-Cevap, Tartışma
8 Mid-Term Exam Written examination, Homework Ölçme Yöntemleri:
Yazılı Sınav
9 VI-PROCESS FEATURES Lecture, Discussion Öğretim Yöntemleri:
Anlatım, Tartışma
10 VI.1. Process Conditions and Production Parameters in Preparation Machines Lecture, Discussion Öğretim Yöntemleri:
Anlatım, Tartışma
11 VI.2. Process Conditions and Production Parameters in Spinning Machines Lecture, Discussion Öğretim Yöntemleri:
Anlatım, Tartışma
12 VII-WORKING CONDITIONS Lecture, Question-Answer, Discussion Öğretim Yöntemleri:
Anlatım, Soru-Cevap, Tartışma
13 VIII-QUALITY CONTROL IN YARNS PRODUCED BY DIFFERENT PROCESSES Lecture, Question-Answer, Discussion Öğretim Yöntemleri:
Anlatım, Soru-Cevap, Tartışma
14 VIX-QUALITY BETWEEN YARN-FABRIC RELATIONSHIP Lecture, Question-Answer, Discussion Öğretim Yöntemleri:
Anlatım, Soru-Cevap, Tartışma
15 X-PRODUCT-QUALITY RELATIONSHIP Lecture, Discussion Öğretim Yöntemleri:
Anlatım, Tartışma
16 Term Exams Written Examination Ölçme Yöntemleri:
Yazılı Sınav
17 Term Exams Written Examination Ölçme Yöntemleri:
Yazılı Sınav


Student Workload - ECTS

Works Number Time (Hour) Workload (Hour)
Course Related Works
Class Time (Exam weeks are excluded) 14 3 42
Out of Class Study (Preliminary Work, Practice) 14 5 70
Assesment Related Works
Homeworks, Projects, Others 0 0 0
Mid-term Exams (Written, Oral, etc.) 1 15 15
Final Exam 1 30 30
Total Workload (Hour) 157
Total Workload / 25 (h) 6,28
ECTS 6 ECTS

Update Time: 13.05.2024 11:20