TÜRKÇE
ENGLISH
Information
| Unit | INSTITUTE OF NATURAL AND APPLIED SCIENCES |
| TEXTILE ENGINEERING (MASTER) (WITH THESIS) | |
| Code | TL534 |
| Name | Quality and Process Control in Spinning |
| Term | 2018-2019 Academic Year |
| Term | Spring |
| Duration (T+A) | 3-0 (T-A) (17 Week) |
| ECTS | 6 ECTS |
| National Credit | 3 National Credit |
| Teaching Language | Türkçe |
| Level | Yüksek Lisans Dersi |
| Type | Normal |
| Mode of study | Yüz Yüze Öğretim |
| Catalog Information Coordinator | Prof. Dr. OSMAN BABAARSLAN |
| Course Instructor |
The current term course schedule has not been prepared yet.
|
Course Goal / Objective
The basic input in the field of textile engineering is to be able to transfer the requirements of process and quality control procedures required for yarn production to the students at the higher education level.
Course Content
I-INTRODUCTION AND DEFINITIONS, II-PROCESS AND QUALITY CONTROL, III-YARN PRODUCTION PROCESSES AND PROCESS STEPS, IV-RAW MATERIAL AS A FACTOR EFFECTING QUALITY , V-PROCESS CONTROL IN PRODUCTION MACHINES , VI-PROCESS FEATURES, VII-WORKING CONDITIONS, VIII - QUALITY CONTROL IN YARNS PRODUCED BY DIFFERENT PROCESSES
Course Precondition
Resources
Notes
Course Learning Outcomes
| Order | Course Learning Outcomes |
|---|---|
| LO01 | In the area of yarn technology (spinning, weaving, knitting) increases knowledge in process and quality control at the level of higher education |
| LO02 | Understands the fundamentals of process and quality control in spinning |
| LO03 | Analyze the interaction between raw materials and machinery in textile engineering and its effects on quality and productivity |
| LO04 | Evaluates process conditions and production parameters in yarn production process |
| LO05 | Develops solution proposals for factors affecting the process efficiency and quality |
Relation with Program Learning Outcome
| Order | Type | Program Learning Outcomes | Level |
|---|---|---|---|
| PLO01 | Bilgi - Kuramsal, Olgusal | Developing and intensifying knowledge in the textile engineering area, based upon the competency in the undergraduate level | 5 |
| PLO02 | Bilgi - Kuramsal, Olgusal | Grasping the inter-disciplinary interaction related to textile engineering | |
| PLO03 | Bilgi - Kuramsal, Olgusal | The ability to use the expert-level theoretical and practical knowledge acquired in textile engineering area | 4 |
| PLO04 | Bilgi - Kuramsal, Olgusal | Interpreting and forming new types of knowledge by combining the knowledge from the textile engineering area and the knowledge from various other disciplines | 3 |
| PLO05 | Bilgi - Kuramsal, Olgusal | Solving the problems faced in textile engineering area by making use of the research methods | |
| PLO06 | Yetkinlikler - Bağımsız Çalışabilme ve Sorumluluk Alabilme Yetkinliği | Systematically transferring the current developments in textile engineering area and one’s own work to other groups in and out of the area; in written, oral and visual forms | 3 |
| PLO07 | Yetkinlikler - Öğrenme Yetkinliği | Using the knowledge and the skills for problem solving and/or application (which are processed within textile engineering) in inter-disciplinary studies | |
| PLO08 | Yetkinlikler - Öğrenme Yetkinliği | The ability to present one’s own work within the international environments in textile engineering area, orally, visually and in written forms | 3 |
| PLO09 | Bilgi - Kuramsal, Olgusal | Developing and intensifying the current and high-level knowledge in the textile engineering area with the use of original thinking and/or research processes and in a specialistic level, based upon the competency in the undergraduate level | 4 |
| PLO10 | Bilgi - Kuramsal, Olgusal | The ability to evaluate and use new information in textile engineering with a systematical approach | 4 |
| PLO11 | Bilgi - Kuramsal, Olgusal | To be able to study in a programmatic manner, in accordance with the logical integrity required by the thesis subject and within the scope of the thesis determined by the supervisor. | |
| PLO12 | Bilgi - Kuramsal, Olgusal | Contributing to the progress in textile engineering area by independently carrying out a study which uses a new idea, method, design and/or application which brings about innovation in the area; or, applying a conventional idea, method, design and/or application to a different environment | |
| PLO13 | Bilgi - Kuramsal, Olgusal | Publishing at least one scientific article in the area of textile engineering in a national and international peer reviewed journal | |
| PLO14 | Yetkinlikler - Öğrenme Yetkinliği | Contributing to the solution of textile engineering area-related social, scientific, cultural and ethical problems and promoting the development of these values |
Week Plan
| Week | Topic | Preparation | Methods |
|---|---|---|---|
| 1 | I-INTRODUCTION AND DEFINITIONS | Lecture | |
| 2 | II-PROCESS AND QUALITY CONTROL | Lecture, Question and Answer | |
| 3 | III-YARN PRODUCTION PROCESSES AND PROCESS STEPS | Lecture, Discussion | |
| 4 | IV-RAW MATERIAL AS A FACTOR EFFECTING QUALITY | Lecture, Discussion | |
| 5 | PROCESS CONTROL IN PRODUCTION MACHINES | Lecture, Question-Answer, Discussion | |
| 6 | V.1. Production Machines | Lecture, Question-Answer, Discussion | |
| 7 | V.2. Raw Material-Machine Interaction | Lecture, Question-Answer, Discussion | |
| 8 | Mid-Term Exam | Written examination, Homework | |
| 9 | VI-PROCESS FEATURES | Lecture, Discussion | |
| 10 | VI.1. Process Conditions and Production Parameters in Preparation Machines | Lecture, Discussion | |
| 11 | VI.2. Process Conditions and Production Parameters in Spinning Machines | Lecture, Discussion | |
| 12 | VII-WORKING CONDITIONS | Lecture, Question-Answer, Discussion | |
| 13 | VIII-QUALITY CONTROL IN YARNS PRODUCED BY DIFFERENT PROCESSES | Lecture, Question-Answer, Discussion | |
| 14 | VIX-QUALITY BETWEEN YARN-FABRIC RELATIONSHIP | Lecture, Question-Answer, Discussion | |
| 15 | X-PRODUCT-QUALITY RELATIONSHIP | Lecture, Discussion | |
| 16 | Term Exams | Written Examination | |
| 17 | Term Exams |
Student Workload - ECTS
| Works | Number | Time (Hour) | Workload (Hour) |
|---|---|---|---|
| Course Related Works | |||
| Class Time (Exam weeks are excluded) | 14 | 3 | 42 |
| Out of Class Study (Preliminary Work, Practice) | 14 | 5 | 70 |
| Assesment Related Works | |||
| Homeworks, Projects, Others | 0 | 0 | 0 |
| Mid-term Exams (Written, Oral, etc.) | 1 | 15 | 15 |
| Final Exam | 1 | 30 | 30 |
| Total Workload (Hour) | 157 | ||
| Total Workload / 25 (h) | 6,28 | ||
| ECTS | 6 ECTS | ||